Artikelnummer: 230681
Dit product is niet uit voorraad leverbaar, maar mogelijk wel bij onze leverancier, neem contact op met één van onze winkels of onze klantenservice voor de beste prijs en levertijd.
Winkelvoorraad
- Amsterdam XL Op aanvraag Vandaag open tot 18 uur
- Den Bosch NEW Op aanvraag Vandaag open tot 18 uur
- Den Haag XXL Op aanvraag Vandaag open tot 20 uur
- The DJGear Shop - Den Haag NEW Op aanvraag Vandaag open tot 18 uur
- Deventer Op aanvraag Vandaag open tot 18 uur
- Eindhoven XXL Op aanvraag Vandaag open tot 18 uur
- Groningen Op aanvraag Vandaag open tot 18 uur
- Heerlen Op aanvraag Vandaag open tot 18 uur
- Rotterdam XXXL Op aanvraag Vandaag open tot 18 uur
- Utrecht Op aanvraag Vandaag open tot 18 uur
- Frankrijk
- Valenciennes Op aanvraag Vandaag open tot 19 uur
- België
- Antwerpen XXL Op aanvraag Vandaag open tot 18 uur
- Brussel Op aanvraag Vandaag open tot 18 uur
- Gent Op aanvraag Vandaag open tot 18 uur
- The DJGear Shop - Gent Op aanvraag Vandaag open tot 18 uur
- Hasselt Op aanvraag Vandaag open tot 18 uur
- Herentals Op aanvraag Vandaag open tot 18 uur
- Kortrijk NEW Op aanvraag Vandaag open tot 18 uur
- Mechelen Op aanvraag Vandaag open tot 18 uur
- Oostende Op aanvraag Vandaag open tot 18 uur
- Roeselare Op aanvraag Vandaag open tot 18 uur
- Magazijn Op aanvraag
Warm Audio TB12 Tonebeast
The Tone Beast is a mic pre that likes to be pushed and when pushed will colorize your signal ever so sweetly. The 2 opamps and 2 output transformers at the flip of their switches won't appear to be much different, but as one drives the pre into harmonic distortion, the unique character of each of these components becomes apparent. Additionally the Tone Beast is customizable and allows for other opamps to be sourced and easily swapped into the unit. I've pulled my best tones from this pre right at the saturation point (as loud as I can push the gain before clipping). The output control on the TB12 allows you to limit the signal exiting the preamp even when pushing the gain to really hot levels, giving you maximum control.
The x731 (Melcor 1731) and x18 (Dean Jensen's 918) Op Amps saturate a bit differently. The 1731 breaks up faster and has more color when pushed. The 918 is fairly linear/clean with a smidge of character and does not break-up/saturate as quickly. The 100% steel output transformer colors the signal more than the 50% nickel transformer when pushed. However, both are designed to impart character. The 50% nickel transformer will impart less character and provide greater high and low frequencies. For an ultra clean, character-lacking tone, try the x18 while bypassing the output transformers completely.
Have no fear of hurting the Beast, you can push it very hard into full-on distortions if you wish, and these can sound quite nice on electric guitar, bass or anything else that likes some nice grit.
When hand building mic pres I learned a bit about the "subtle" differences component choices can make. A little change here, and another there often times became a huge deal in a finished mix, but often times is not very noticeable at first take. The different component options in the TB12 are subtle, but when driven into saturation are noticeable and can make a big difference to the way your final mix will sound.
Home-based musicians and professional studios alike will find the Tone Beast to be an extremely powerful and fully professional piece of gear that is capable of warming and shaping signals/mixes in a way that is very pleasing to the ear.
Warm Audio TB12 Tonebeast
• Discrete 312 preamp design with coupled CineMag Transformers
• 71db of gain
• Transformer selection provides both Steel and 50% Nickel CineMag output transformers for varying character
• Transformer bypass switch allows for removal of the output transformer from the circuit
• Discrete Opamp selection provides both the classic 1731(vintage) and 918(cleaner) style opamps. These are socketed/swappable with your choice of 2520 6 pin footprint opamps.
• Impedance switch labeled TONE to switch between 150 and 600 ohms input impedance
• Capacitor selection between Tantalum and Electrolytic for different characters
• 80hz hipass filter
• Polarity Reverse
• +48V phantom power
• Output attenuation allowing for saturation flexibility of both the opamps and transformers
• ¼" insert for the use of inline compressors, eq's etc..
• Balanced XLR mic (front and back), balanced TRS line, and ¼" instrument inputs
• Balanced XLR and TRS outputs
• -20db Pad
• LED VU Meter
• 19" rackmountable
• External line-lump 24V AC power transformer for low noise
