399,-
(Incl. BTW)
Artikelnummer: 100154
Levertijd op aanvraag
?
×
Dit product is op voorraad in één of meer winkels, maar is op dit moment niet direct beschikbaar voor verzending. Neem contact op met onze klantenservice voor meer informatie.
Winkelvoorraad
- Groningen Test exemplaar Morgen open vanaf 10 uur
- Rotterdam XXL Snel leverbaar Morgen open vanaf 10 uur
- Amsterdam Snel leverbaar Morgen open vanaf 10 uur
- The DJGear Shop - Amsterdam NEW Snel leverbaar Morgen open vanaf 10 uur
- Den Haag Snel leverbaar Morgen open vanaf 10 uur
- Eindhoven Snel leverbaar Morgen open vanaf 10 uur
- Heerlen Snel leverbaar Morgen open vanaf 10 uur
- Leeuwarden Snel leverbaar Morgen open vanaf 10 uur
- Utrecht Snel leverbaar Morgen open vanaf 10 uur
- België
- Sint-Niklaas XXL Snel leverbaar Morgen open vanaf 10 uur
- Antwerpen XXL Snel leverbaar Morgen open vanaf 10 uur
- Brugge Snel leverbaar Morgen open vanaf 10 uur
- Brussel Snel leverbaar Morgen open vanaf 10 uur
- Gent Snel leverbaar Morgen open vanaf 10 uur
- Hasselt Snel leverbaar Morgen open vanaf 10 uur
- Herentals Snel leverbaar Morgen open vanaf 10 uur
- Leuven Snel leverbaar Morgen open vanaf 10 uur
- Luik Snel leverbaar Morgen open vanaf 10 uur
- Mechelen Snel leverbaar Morgen open vanaf 10 uur
- Roeselare Snel leverbaar Morgen open vanaf 10 uur
- Frankrijk
- Valenciennes Snel leverbaar Morgen open vanaf 10 uur
Toon meer
sE Electronics GM10
The GM10 is the answer to the legendary problem of the acoustic guitar pickup: when
using a condenser microphone, there has always been (until now!) a compromise between a 'clinical' recording sound and a good performance sound, because any movement of the musician induces an 'off-axis' movement of the microphone and therefore a change of the sound color.
The sE Electronics GM10 solves this problem:
1. The design of the microphone includes a simple but effective clamp mechanism for fixing the body of the guitar and the microphone together. The microphone capsule is separated from the preamp by an articulated arm that allows to orient the capsule optimally.
2. The capsule has a built-in suspension that helps isolate the microphone diaphragm from all the mechanical noises of the guitar.
3. The capsule is a mini-capsule in Mylar and Spray Gold (17.1 mm membrane). It sounds like a large diaphragm condenser microphone, with excellent transient response but with the advantage of its small size at ease of use.
using a condenser microphone, there has always been (until now!) a compromise between a 'clinical' recording sound and a good performance sound, because any movement of the musician induces an 'off-axis' movement of the microphone and therefore a change of the sound color.
The sE Electronics GM10 solves this problem:
1. The design of the microphone includes a simple but effective clamp mechanism for fixing the body of the guitar and the microphone together. The microphone capsule is separated from the preamp by an articulated arm that allows to orient the capsule optimally.
2. The capsule has a built-in suspension that helps isolate the microphone diaphragm from all the mechanical noises of the guitar.
3. The capsule is a mini-capsule in Mylar and Spray Gold (17.1 mm membrane). It sounds like a large diaphragm condenser microphone, with excellent transient response but with the advantage of its small size at ease of use.
sE Electronics GM10
• Frequency Response: 20Hz-20KHz
• Sensitivity: 24mv/pa-32 ± 2dB(0dB=1V/Pa 1000Hz)
• Polar Pattern: Cardioid
• Impedance: = 50 Ohms
• Equivalent Noise Level: 10dB(A weighted)
• Max SPL for 0.5% THD@1000Hz : 135dB
• Power Requirement: Phantom power 48V±4V
• Connector: 3-pin
