Artikelnummer: 277792
Dit product is op voorraad bij onze leverancier en kan snel verzonden worden.
Winkelvoorraad
- Rotterdam XXL Snel leverbaar Vandaag open vanaf 10 uur
- Amsterdam Snel leverbaar Vandaag open vanaf 10 uur
- Apeldoorn Snel leverbaar Vandaag open vanaf 10 uur
- Den Haag Snel leverbaar Vandaag open vanaf 10 uur
- Eindhoven Snel leverbaar Vandaag open vanaf 10 uur
- Groningen Snel leverbaar Vandaag open vanaf 10 uur
- Leeuwarden Snel leverbaar Vandaag open vanaf 10 uur
- Utrecht Snel leverbaar Vandaag open vanaf 10 uur
- België
- Sint-Niklaas XXL Snel leverbaar Vandaag open vanaf 10 uur
- Antwerpen Snel leverbaar Vandaag open vanaf 10 uur
- Brugge Snel leverbaar Vandaag open vanaf 10 uur
- Brussel Snel leverbaar Vandaag open vanaf 10 uur
- Gent Snel leverbaar Vandaag open vanaf 10 uur
- Herentals Snel leverbaar Vandaag open vanaf 10 uur
- Leuven Snel leverbaar Vandaag open vanaf 10 uur
- Luik Snel leverbaar Vandaag open vanaf 10 uur
- Mechelen Snel leverbaar Vandaag open vanaf 10 uur
- Roeselare Snel leverbaar Vandaag open vanaf 10 uur
- Frankrijk
- Valenciennes Snel leverbaar Vandaag open vanaf 10 uur
Saramonic SR-AXM3
• Ultra-compact and lightweight XLR shotgun microphones
• Can easily be attached directly to equipment
• Ideal for use with the SR-AX107, SR-PAX1, SR-PAX2, SR-AX104, BMCC-A01, MixAdapter, MixMic and the SmartRig+ series
• Foam windscreens included
• Durable all-metal construction
The Saramonic SR-AXM3 is a pair of high-quality shotgun microphones with XLR connectors that are incredibly compact and lightweight. They were designed to be used in camera audio equipment like the Saramonic SR-AX107, SR-PAX1, SR-PAX2, SR-AX104, BMCC-A01, MixAdapter, MixMic and the SmartRig+ series, but they can also be used in any XLR mic input or cable that provides phantom power. They both provide clean and rich broadcast-quality audio
If you have a piece of gear with XLR inputs, you're forced to run a cable from that input in order to connect a microphone. The SR-AXM3 are ultra-compact and lightweight, so they're ideal for flush-mounting directly to equipment like the previously mentioned Saramonic gear, as well as devices like the Zoom H4n and the Tascam DR-60D.
These microphones feature cardioid pickup patterns, which reject unwanted sounds to the sides and rear, and focus on the sounds in front. Even though they're ultra-compact, their shotgun capsules provide more reach than normal microphones, and their all-metal construction provides the strength you need for video production.
Saramonic SR-AXM3
Connector: 3-pin XLR
Polar Pattern: Cardioid
Frequency Range: 40Hz to 18kHz
Sensitivity: -35dB +/- 3dB
Output Impedance: 600ohm
Signal to Noise Ratio: 75 dB SPL
Power:+48V Phantom Power
Dimensions:4.1 x 0.9 x 0.9? (10.4 x 2.3 x 2.3cm)
Weight: 2.1 oz (60g)
Included items
• 2 x Shotgun microphones
• 2 x Foam windscreens
• 1 x Printed manual
• 1 x Warranty card
Optional Accessories (Sold Separately)
• SR-AX107 Two-Channel XLR Camera Audio Adapter and Mixer with Microphone Preamps and Isolation Transformer for DSLR, Mirrorless and Video Cameras
• SR-PAX1 Two-Channel Shoe-Mountable XLR Audio Adapter with Microphone Preamps for DSLR, Mirrorless and Video Cameras
• SR-PAX2 Two-Channel XLR Audio Adapter with Microphone Preamps for DSLR, Mirrorless and Video Cameras
• SR-AX104 Two-Channel XLR Audio Adapter with Microphone Preamps for DSLR, Mirrorless and Video Cameras
• BMCC-A01 Two-Channel XLR Audio Adapter for Blackmagic Cameras
• SmartRig+ - Two-Channel USB Type-C Audio Interface for Smartphones, Tablets, DSLR, Mirrorless and Video Cameras
• SmartRig+UC Two-Channel USB Type-C Audio Interface for Android Devices, Smartphones, Tablets, PCs and more
• SmartRig+DI Two-Channel Lightning Audio Interface for Apple iPhones, iPads and iPod Touch
• MixAdapter 2-Channel XLR Camera Audio Adapter with SR-NV5 Shotgun Microphone Kit for DSLR, Mirrorless and Video Cameras
Saramonic SR-AXM3
Saramonic SR-AXM3
