(Incl. BTW)
In winkelwagen

Artikelnummer: 281998

Verwachte levertijd 2-5 werkdagen ?


Toon meer

Audient Nero

British audio company Audient is proud to present Nero, the desktop monitor controller. Offering a comprehensive range of I/O, console style monitor control, an assignable sub output, Digital Attenuation Volume Matching and more, Nero is designed to be at the core of the studio.

Marketing Director, Andy Allen says, "Nero builds on our 20 years of expertise in analogue design heritage, courtesy of Dearden designed circuitry. As a studio grows, it can be difficult to keep a handle on monitoring, but Nero will provide centralised, customisable control for all your monitoring needs - right from your desktop."

Four stereo analogue inputs, including two line level inputs, a dedicated cue mix input, one aux input (RCA or Mini Jack) and both optical and coaxial SPDIF inputs give you a wide variety of connectivity options. These can be fed to three stereo speaker outputs (with the ability to set and match volumes), one assignable sub output, and four headphone outputs.

Audient has also developed its own Digital Attenuation Matching Technology, which perfectly matches the volume of the left and right channels of the stereo signal.

As with many products across the range, Nero is inspired by Audient's heritage in analogue console design and features a range of flexible monitor controls, including dedicated talkback, cut & dim along with polarity, mono, speaker select and cue mix monitoring and Smart Touchpoints.

Smart Touchpoints are configurable buttons that allow you to customise your workflow on the fly, hold a touchpoint down to put into setup mode, then simply route and configure Nero's inputs, outputs and monitor controls to create and save monitoring combinations that work for you. For example, route your sub permanently to any or all sets of speakers without losing the ability to switch it on and off. Or permanently sum an output to Mono for your Mono reference speaker.

When it comes to talkback, Nero features an internal mic as well as a dedicated mic input with phantom power, enabling you to use any dynamic or condenser mic of your choice. You can then route any input source as well as talkback to any headphone output, which means you'll always be in control of your session.

Audient Nero

Balanced Line Inputs
Nominal Input Level: +4dBu
Max Input Level: +18dBu
CMRR: > 50dB
MIC EIN: -128dBu
CMRR: >80dB @ 1kHz

Unbalanced AUX Inputs
Nominal Input Level: -10dBV
Max Input Leve (minimum trim): +27dBu
Trim Range: ±12dB

Digital Inputs
Inputs: TOSLINK and Coaxial
Format: S/PDIF
Sample Rates: 44.1kHz - 192kHz
Bit Depth: up to 24bit

Talkback Inputs
Maximum Input Level: 2dBu
Gain: 4-44dB
Phantom Power: +48V

Speaker Outputs
Maximum Output Level: +12dBu

Headphone Outputs
Minimum Load: 12.8Ohms

Speaker Outputs
THD+N: 0.0015% 0dBu 1k input
SNR: 100dBu
Crosstalk (Speakers): >100dB
Frequency Response: 20Hz - 22kHz ±0.5dB
Attenuation at min volume (Speaker Outputs): >110dB

THD+N: <0.0017%
Dynamic Range: 113dB
Frequency Response: 20Hz - 22kHz ±0.5dB

Headphone Outputs
THD+N @ 0dBu (output level):
• 0.009% - 30Ohm
• 0.009% - 60Ohm
• 0.008% - 600Ohm

PEAK Power Output:
• 90mW - 30Ohm
• 56mW - 60Ohm
• 7.35mW - 600Ohm
• Crosstalk: >62dB
• Attenuation at Min Volume: >96dB

Power Supply
• 12VDC Centre Positive DC Adapter - 2Amps

Unit: 2kg

Unit: 255mm (w) x 75mm (h) x 155mm (d)

Audient Nero

Audient Nero


Gerelateerd van Audient

Interessante alternatieven

Populair van Audient