(Incl. VAT)
Add to cart

Item number: 100154

In stock ?

Store inventory

Show more

sE Electronics GM10

The GM10 is the answer to the legendary problem of the acoustic guitar pickup: when
using a condenser microphone, there has always been (until now!) a compromise between a 'clinical' recording sound and a good performance sound, because any movement of the musician induces an 'off-axis' movement of the microphone and therefore a change of the sound color.

The sE Electronics GM10 solves this problem:
1. The design of the microphone includes a simple but effective clamp mechanism for fixing the body of the guitar and the microphone together. The microphone capsule is separated from the preamp by an articulated arm that allows to orient the capsule optimally.
2. The capsule has a built-in suspension that helps isolate the microphone diaphragm from all the mechanical noises of the guitar.
3. The capsule is a mini-capsule in Mylar and Spray Gold (17.1 mm membrane). It sounds like a large diaphragm condenser microphone, with excellent transient response but with the advantage of its small size at ease of use.

sE Electronics GM10

• Frequency Response: 20Hz-20KHz
• Sensitivity: 24mv/pa-32 ± 2dB(0dB=1V/Pa 1000Hz)
• Polar Pattern: Cardioid
• Impedance: = 50 Ohms
• Equivalent Noise Level: 10dB(A weighted)
• Max SPL for 0.5% THD@1000Hz : 135dB
• Power Requirement: Phantom power 48V±4V
• Connector: 3-pin

sE Electronics GM10

sE Electronics GM10


Interesting alternatives

Populair from sE Electronics