Cranborne Audio Camden EC1

649,-
(Incl. VAT)
Add to cart

Item number: 300753

Delivery time on request ?

Store inventory

Show more

Cranborne Audio Camden EC1



Award-winning Preamp Performance
Connect the Camden EC1 to your audio interface and experience the award-winning sound of the Camden preamp design. Providing up to 68.5dB of pristine, clean gain, the Camden EC1 is the perfect preamp to pair with low-gain dynamic microphones and ribbon mics.

Powerful Headphone Monitoring
Featuring a reference-grade, high-powered headphone amp with a dedicated line mixer, Camden EC1 gives you TRUE, zero latency, mastering-quality monitoring of your preamp that is effortlessly mixed with playback from your DAW.

Ultra-Clean and Transparent
Capture your mic, line, and instruments with complete transparency; boost low-sensitivity dynamic microphones without adding noise; and capture instant peaks without phase shifts that make mixing difficult.

With Vintage Mojo On Tap
At the turn of a dial, the clean, Camden preamp takes on the persona of vintage transformer or valve-based preamps using its Mojo analogue saturation control and 'thump' and 'Cream' styles.

Cranborne Audio Camden EC1



Preamp
• Test Signal Path: APx555 (Line Out) - Input 1 - Line Output - APx555 (Line In)

• Input Impedance:
- Mic = 8.9 kOhms 48v Off, 5.4 kOhms 48v ON,
- Line = 24.3 kOhms,
- Hi-Z= 1.5 MOhm Unbalanced, 3 MOhm Balanced

• Max Input Level:
- Mic = +17.6dBu (<0.003% THD)
- Line = +26.5dBu (<0.02% THD)
- Hi-Z = +24dBu (<0.02% THD)

• Minimum Gain: Mic = 8dB, Line = 0dB, Hi-Z = 3dB

• Maximum Gain: Mic = 68dB, Line = 60dB, Hi-Z = 63dB

• Equivalent Input Noise (EIN)
<-129.5dBu (150 Ohm source, unweighted)
<-131dBu (150 Ohm source, A-weighted)
<-135.5dBu (Inputs common, unweighted)

• Frequency Response
±0.7dB (<1 Hz to >1000 kHz, Min Gain)
±0.7dB (<1 Hz to >1000 kHz, 35dB Gain)
±1dB (<1.5 Hz to 900 kHz, 63dB Gain)
±1dB (<5 Hz to >200 kHz, Max Gain)

• Phase Shift
<2.75° (20Hz to 20kHz, 40dB Gain)
<4° (20Hz to 20kHz, 63dB Gain)
<6° (20Hz to 20kHz, Max Gain)

• THD+N
<0.00025% (1kHz, 35dB Gain, +24dBu out)

• Intermodulation Distortion
<0.0006% (50Hz and 7kHz, 35dB gain, +20dBu out)
<0.0005% (50Hz and 7kHz, 35dB gain, +15dBu out)

• Hi-Pass Filter (HPF): 80Hz, -3dB, 12dB/Oct

• CMRR
>70dB, typ >85dB, 35dB gain, 10-20kHz, 100mV Common mode

• Slew Rate: 20V/uS, 35dB gain, +25dBu out

• 48v LED Thresholds
- Off = 48v Off, voltage fully discharged
- Amber = 48v voltage charging/discharging
- Red = 48v fully charged

• Signal LED Meter Thresholds
- Blue = -20dBu
- Green = -12dBu
- Amber = +21dBu
- Red = +24dBu

• Max Output Level
- Balanced XLR = +27.5dBu (<0.002% THD, 30dB Gain)
- Impedance Balanced ¼” Jack = +21.5dBu (<0.002% THD, 30dB Gain)

• Output Impedance
- Balanced XLR = 150 Ohm
- Impedance Balanced 1/4” Jack = 150Ohm Balanced, 75 Ohm Unbalanced

• Link Max Output Level
- Impedance Balanced 1/4” Jack = +21.8dBu (<0.006% THD)

• Link Output Impedance
- Impedance Balanced 1/4” Jack = 75 Ohm Unbalanced, 150 Ohm Balanced (Buffered Output)

Headphone Amplifier
• Test Signal Path: APx555 (Line Out) - AUX Input - Headphone Output - APx555 (Line In)

• Frequency Response: -1dB, <1Hz to >70kHz

• THD
<0.0006% (-104.4dB) @ +20dBu, 1kHz, A-weighted, 300 Ohm load

• THD+N
<0.00085% (-101.4dB) @ +20dBu, 1kHz, A-weighted, 300 Ohm load

• Output Impedance: 0.33 Ohms

• Output Wattage
- 250mW x 2 @ 600 Ohms, 1kHz
- 650mW x 2 @ 220 Ohms, 1kHz
- 1.21W x 2 @ 100 Ohms, 1kHz
- 500mW x 2 @ 32 Ohms, 1kHz

• Dynamic Range: 114.5dB A-weighted, AES17 method, 20Hz - 20kHz, 300 Ohm load

• Noise Floor: -93.5dBu A-weighted, 20Hz - 20kHz, 300 Ohm load

Power
• AC Requirements: 100V – 240V AC, 50 – 60 Hz

• Total Power Consumption: 24v, 1.25A DC, 30W

Environmental
• Operating Temperature: +1 to 35 degrees Celsius

• Storage Conditions: -20 to 50 degrees Celsius

Dimensions/Weights
• Unit
- Width: 220mm (8.6") (Rackmount Kit Available)
- Height: 44.45mm (1.75") (1u)
- Depth: 240mm (9.5")
- Weight: 1.8kg (3.9lb)

• Shipping Carton
- Width: 360mm (14.2")
- Height: 120mm (4.7")
- Depth: 340mm (13.4")
- Weight: 2.6kg (5.7lb)

Cranborne Audio Camden EC1

Cranborne Audio Camden EC1

 

Related from Cranborne Audio

Interesting alternatives

Populair from Cranborne Audio