Item number: 269925

This product is temporary not available.

Populair from Audio Technica

Audio Technica ATW-1102 System 10

Audio-Technica’s ATW-1102 System 10 is the most reliable digital high-fidelity wireless system of its generation. Designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Featuring stackable, contemporary styling, each configuration includes a mono ATW-R1100 receiver and an ATW-T1001 body-pack transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range – completely free from TV/ 3G interference
• Three levels of diversity assurance: frequency, time, & space
• Automatic frequency selection for seamless, interference-free operation
• Automatic Frequency Selection. Plug & Play. Ease of use and reliability
• Extremely easy operation with instantaneous channel selection, sync, and set-up
• State-of-the-art digital receiver for reliable performance
• Balanced XLR and unbalanced 1/4” output jacks with level control

2.4 ghz digital system, 24 bits/48 khz
The System 10 continuously monitors the activity in the 2.4GHz band and automatically adjusts the best signal in case of interference with WLAN routers, Bluetooth devices or other HF microphones. The 2.4 GHz frequency band keeps you away from licensing or frequency coordination issues, or frequencies used by DTV and 4G.

Automatic frequency selection
The System 10 automatically changes its frequency. Unlike other systems on the market that attach to 2 or 4 frequency, the System 10 will constantly "monitor" the frequencies and switch if necessary. Thus, there are always a good 2 frequencies in the system, and the user does not need to manually intervene.

A reliable multiplex system
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

High fidelity sound: The System 10 Pro offers high-fidelity audio quality over the entire frequency band. No compression of signal during transmission and reception.
Easy to use: Although the System 10 is a professional and effective wireless system, the user does not need special training to operate. Once unwrapped, it's ready to roll!

Audio Technica ATW-1102 System 10

Overall System
Operating Frequencies: 2.4 GHz ISM band
Frequency Response: 20 Hz to 20 kHz Depending on microphone type
Operating Range: 30 m (100') Open range env. with no interfering signals
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical
Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Audio Sampling: 24 bit / 48 kHz
Latency: 3.8 ms

Receiving System: Diversity (frequency/time/space)
Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions: 190 mm W x 46.2 mm Hx 128.5 mm D
Weight: 290g
Accessories Included: Power supply

Handheld Transmitter Specifications
RF Power Output: 10 mW
Spurious Emissions: Following federal and national regulations
Batteries: Two 1.5V AA
not included
Battery Life: >7 hours (alkaline)
Depending on battery type and use pattern
Dimensions: 254.8 mm (10.03") long,
50.0 mm (1.97") diameter
Net Weight: 280 grams (9.9 oz)
without batteries
Accessory Included: AT8456a Quiet-Flex™ stand clamp

Audio Technica ATW-1102 System 10

Audio Technica ATW-1102 System 10