65,-
(Incl. VAT)
Item number: 110527
Delivery time 2-10 working days
?
×
This item is in stock in one or more stores and can be dispatched within a few days.
Store inventory
- Netherlands
- Amsterdam Not in stock Try in store
- Den Bosch Not in stock Try in store
- Eindhoven Not in stock Try in store
- Rotterdam Not in stock Try in store
- Utrecht Not in stock Try in store
- Belgium
- Antwerp In stock Try in store
- Brussels Not in stock Try in store
- Ghent Not in stock Try in store
- Distribution Centre Not in stock
Show more
ART Phantom I
Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be "more is better."
For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48V mic, you would obtain best results with 48 volts of phantom power. The Phantom I is a great choice for the above needs.
For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48V mic, you would obtain best results with 48 volts of phantom power. The Phantom I is a great choice for the above needs.
ART Phantom I
Input Connectors: XLR female
Output Connectors: XLR male
Frequency Response: 10Hz - 25kHz
Output Phantom Power: 48V DC +/- 2V
Output Noise: -115 dBV
Current Drain: 14mA
Power: 18V DC (Adapter included)
Dimensions: 5.25x2.75x1.75 inches (130mm x 74mm x 45mm)
Weight: 1.3 lbs (315g)
