Analogue Solutions Fusebox

Analogue Solutions Fusebox

• 3 VCOs each featuring Sawtooth and Square wave.
• All have CV inputs for Pitch and Pulse width.
• Manual Pulse width.
• VCO 1 also has an Octave switch and Cross modulation switch (FM).
• VCO 2 has a Wide range switch – to make the Tune range very wide (down to LF!). It also has oscillator Sync.
• VCO 3 also has a Wide range switch. Also, MIDI pitch control can be disabled to make this a free running oscillator. Ideal for modulation duties.
• VCO 2 and 3 can both be used as LFOs.
• White Noise.
• Sub oscillator, taken from VCO 3.
• Mixer – with Mute switches and additional audio inputs.
• Multimode 12db filter – featuring Low pass, High pass, Band pass, and Notch filters.
• VCA – with EG and Thru (bypass) switch.
• LFO – with delay (fade in) feature.
• 2 Envelope Generators. With Triggering options.
• MIDI In, Out, Thru
• Interval Generator. A special type of pitch transposer. You can set 6 different pitches to each of the switches, and then transpose the VCOs manually to create performances. Great when used in conjunction with the arpeggiator and / or patternator.
• Arpeggiator – Using a MIDI keyboard program in notes to arpeggiate!
• The arpeggiator can also be used as a simple 16 note sequencer.
• The arpeggiator will transmit the notes to MIDI Out
• Patternator – this is a unique type of sequencer / rhythm generator.
• Use the 4 CV control to create melodic loops – change the the loop using the Skip and Reset switches in real time!
• Use the 2 Beat knobs to alter the 8 step gate / trigger pattern generator.
• Unique artistic case design. 5 minutes with a screwdriver and the plan can be flipped, allowing the synth to be laid flat.
• Real analogue hard wood sides, from a sustainable source.
• MIDI to CV output socket including clock.
• All circuits have extensive minijack input and output sockets. It can be cross-patched within its self to create an infinite range of sounds. Or it can be cross patched with other synths and modulars.