233,-
(Incl. VAT)
Item number: 260087
Delivery time 2-10 working days
?
×
This item is in stock in one or more stores and can be dispatched within a few days.
Store inventory
- Netherlands
- Amsterdam Not in stock Try in store
- Den Bosch Not in stock Try in store
- Eindhoven Not in stock Try in store
- Rotterdam Not in stock Try in store
- Utrecht Not in stock Try in store
- Belgium
- Antwerp Not in stock Try in store
- Brussels Not in stock Try in store
- Ghent Not in stock Try in store
- Distribution Centre Not in stock
Show more
AC Tronic FET13s
The FET13S Guitar Piezo pickup preamp is a special high quality preamp with piezo pickup element for acoustic guitars, has a very high impedance input , which
ensures that the high-impedance output of the piezo not getting loaded so the frequency response of the pickup piezo gets much larger. The piezo element therefore is specifically selected for this purpose which results in a natural tone of the guitar itself. The amp has no frequency correction or tone control.
This preamplifier is straight frequency characteristic!
Most guitar amplifiers with piezo are colour tone controlled, this results in not longer matching the original sound of the guitar itself, they have a totally different sound, those amps have no straight frequency response.
The FET13S tries to get the original guitar sound as good as possible to approach, with high quality.The output impedance is very low so inductance and capacitance of the cable has almost no effect.
The FET13S comes with its carefully selected piezo pickup and 9 Volt battery clip and a Switchcraft jack socket.
Please note that during installation, the preamplifier is sensitive to electrostatic discharge, only use soldering irons with transformers and grounding !
ensures that the high-impedance output of the piezo not getting loaded so the frequency response of the pickup piezo gets much larger. The piezo element therefore is specifically selected for this purpose which results in a natural tone of the guitar itself. The amp has no frequency correction or tone control.
This preamplifier is straight frequency characteristic!
Most guitar amplifiers with piezo are colour tone controlled, this results in not longer matching the original sound of the guitar itself, they have a totally different sound, those amps have no straight frequency response.
The FET13S tries to get the original guitar sound as good as possible to approach, with high quality.The output impedance is very low so inductance and capacitance of the cable has almost no effect.
The FET13S comes with its carefully selected piezo pickup and 9 Volt battery clip and a Switchcraft jack socket.
Please note that during installation, the preamplifier is sensitive to electrostatic discharge, only use soldering irons with transformers and grounding !
AC Tronic FET13s
-gain 15dB
-frequency 20hz -> 22khz (-3db point)
-signal to noise ratio> 90dB
-input imp. ----
-output impedance 1 K
-9 volt battery powered.
-current 7.5 mA
