Numéro d'article: 121796
Ce produit est de stock dans l'un ou plusieurs de nos magasins mais est actuellement indisponible à la livraison. Veuillez prendre contact avec notre service clientèle pour plus d'informations.
Inventaire du magasins
- Anvers Only in store Ouverte jusqu'a 18:00 hr
- Bruxelles Pas en stock Ouverte jusqu'a 18:00 hr
- Gand Pas en stock Ouverte jusqu'a 18:00 hr
- Magasin Pas en stock
- Pays-Bas
- Rotterdam Only in store Ouverte jusqu'a 18:00 hr
- Amsterdam Pas en stock Ouverte jusqu'a 20:00 hr
- Den Bosch Pas en stock Ouverte jusqu'a 21:00 hr
- Eindhoven Pas en stock Ouverte jusqu'a 18:00 hr
- Utrecht Pas en stock Ouverte jusqu'a 20:00 hr
Neumann KH120A
Neumann KH120A
Free field frequency response ±6 dB: 46 Hz … 24 kHz
Free field frequency response ±3 dB: 52 Hz … 21 kHz
Free field frequency linearity deviation between 100 Hz and 10 kHz: ± 1.0 dB
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced: ±0.97; ±0.40; ±0.23 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space: 95 dB SPL (>120 Hz)
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 111.1 dB SPL
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 105.1 dB SPL
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 104.8 dB SPL
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 107 dB(C) SPL
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range): 97 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 104 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 88 / 93 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer): 89 / 94 dB(C) SPL
Analog input(s): XLR: analog electronically balanced
Analog input impedance: 10k Ohms in position 94/108 dB SPL at 1 m; 20k Ohms in position 100/114 dB SPL at 1 m
Max. input level: +24 dBu
Common mode rejection ratio (CMRR): >56 dB @ 15kHz
Input gain control (sensitivity): 0 dB ... -15 dB
Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
Controller design: Analog; active
Crossover frequency: 2.0 kHz
Crossover slope: 24 dB/oct; 4th order
Equalization: Bass: 0; -2.5; -5; -7.5 dB
Equalization: Low-Mid: 0; -1.5; -3; -4.5 dB
Equalization: Treble: +1; 0; -1; -2 dB
Protection circuitry: Independent thermo limiters for woofer, tweeter. Woofer soft clip and excursion limiters. Amplifier overheat.
Infrasonic filter: frequency; slope: 30 Hz; 6 dB/Oct.
Display: On; Normal Operation: Neumann logo “White”
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Neumann logo “Red”
Display Brightness: White:on/dimmed/off; Red:on/dimmed
Output power woofer amplifier (THD+N with limiter deactivated: 10%): 80 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%): 80 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%): 50 W
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%): 50 W
Mains Power Supply: input voltage; frequency: 100-240V; 50/60 Hz
Power consumption (230 V / 100 V): Idle: 20 W
Power consumption (230 V / 100 V): Full output: 200 W
In-rush current (Peak): 20 A
Cabinet material: Aluminium
Cabinet surface finish; color (front / back): Painted; metallic anthracite (RAL 7021)
Neumann KH120A
Accessoires recommandés
