199,-
(TTC)
Ajouter au panier

Numéro d'article: 258384

Délai de livraison sur demande ?

Inventaire du magasins

Voir plus

Lewitt Interviewer

With the INTERVIEWER we are introducing the first interview microphone to our product line. This extremely sturdy dynamic microphone features an omnidirectional polar pattern. Its capsule is fully rubber mounted. In combination with the INTERVIEWER new coating technology all handling noise is reduced to a minimum while offering safe and comfortable grip. With the purpose-built Dust Protection Membrane and its heavily rugged, most resilient housing, the INTERVIEWER will be the perfect companion even under the roughest conditions.

What's in the box?
INTERVIEWER, reporter microphone with omnidirectional capsule
Camera adapter (XLR-Female to 3.5mm connector)
Windshield
Microphone fl ag - customizable
DTP 50 Lb, transport bag

Getting started:
1 Connect your INTERVIEWER to your mobile recorder, wireless transmitter,
camera with XLR input or audio interface.
2 To connect the microphone directly to your 3.5mm camera audio input, use the
supplied adapter.
3 Set the input gain on your recording device/camera.
4 Use the supplied windshield if necessary.
5 If branding is required, use the supplied microphone fl ag.
6 Please note: The microphone does not need to be moved back and forth during
the interview (omni pattern). Just hold the microphone still around chest height
(Fig.1). This way, you have no microphone in the face area without loss in sound
quality. Speaking into the microphone from a closer distance might be
necessary in very loud and noisy environments.

Overview:
// Dynamic microphone for reports, podcasts and interviews
// High clarity and best in class speech intelligibility
// Omnidirectional polar pattern picks up sound from every direction equally
// Whisper Coating to reduce handling noise to a minimum
// Integrated acoustic pop and windshield
// No irritating microphone in the face area while fi lming
// Direct connectivity to your camera using the supplied adapter
// Gold plated & corrosion-resistant 3-pin XLR output connector
// Solid full-metal, die-cast body
// Scope of Supply
// INTERVIEWER, reporter microphone with omnidirectional capsule
// Camera adapter (XLR-Female to 3.5mm phone connector)
// Windshield
// Microphone fl ag - customizable
// DTP 50 Lb, transport bag
// Microphone Flag

The microphone fl ag can be screen printed with your logo or graphic. You can also apply a weatherproof label with the following dimensions: 66x39mm. You can download a template here:

www.lewitt-audio.com/download/interviewer-microphone-flag

Lewitt Interviewer

• Type: Dynamic, moving coil
• Polar pattern: Omnidirectional
• Sensitivity: 1.33 mV/Pa, -57.58 dBV/Pa
• Internal impedance: 235 O
• Rated load impedance: 1000 O
• Connector: Gold plated 3-pin XLR
• Microphone dimensions: wiremesh ø - 36 mm | handle ø - 22 mm |
total length - 272.7 mm , wiremesh ø - 1.42 in | handle ø - 0.87 in | total length - 10.74 in
• Microphone net weight: 250 g, 8.82 oz

Lewitt Interviewer

Lewitt Interviewer

 

Alternatives intéressantes

Plus populair de Lewitt