1499,-
(TTC)
Numéro d'article: 110300
En stock
?
×
Ce produit est de stock dans l'un ou plusieurs de nos magasins et peut vous être envoyé endéans les prochains jours.
Inventaire du magasins
- Louvain En stock
- Saint-Nicolas XXL Pas en stock
- Anvers Pas en stock
- Bruges Pas en stock
- Bruxelles Pas en stock
- Gand Pas en stock
- Herentals Pas en stock
- Liège Pas en stock
- Malines Pas en stock
- Roulers Pas en stock
- Pays-Bas
- Rotterdam XXL Pas en stock
- Amsterdam Pas en stock
- La Haye Pas en stock
- Eindhoven Pas en stock
- Groningen Pas en stock
- Heerlen Pas en stock
- Leeuwarden Pas en stock
- Utrecht Pas en stock
- France
- Valenciennes Pas en stock
Voir plus
sE Electronics RNR1
Meet the RNR1 - the world's first mic from Mr. Rupert Neve.
With custom transformers and discrete circuitry from the man behind the recording industry as we know it, the RNR1 hears more than any other ribbon on the planet.
Ribbon mics have been around for a long time, and have always been particularly prized for the exceptionally "natural" sound they provide. Not too forward, never bright or shiny, they capture midrange detail with a pleasant intimacy and usually sit quite easily in a mix.
One downside of their mellow nature used to be physical delicacy, but that challenge was conquered long ago with more rugged, reliable materials. But the other main negative with ribbon mics is the high-frequency roll-off inherent in their design, which had never been dealt with until Rupert Neve - the father of the recording console - decided to make a microphone.
With custom transformers and discrete circuitry from the man behind the recording industry as we know it, the RNR1 hears more than any other ribbon on the planet.
Ribbon mics have been around for a long time, and have always been particularly prized for the exceptionally "natural" sound they provide. Not too forward, never bright or shiny, they capture midrange detail with a pleasant intimacy and usually sit quite easily in a mix.
One downside of their mellow nature used to be physical delicacy, but that challenge was conquered long ago with more rugged, reliable materials. But the other main negative with ribbon mics is the high-frequency roll-off inherent in their design, which had never been dealt with until Rupert Neve - the father of the recording console - decided to make a microphone.
sE Electronics RNR1
• Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics
• Generating Element: Hand-tensioned 2.5µm aluminum ribbon
• Directional Pattern: Figure-8
• Frequency range: 20 Hz - 25 kHz
• Impedance: 200 Ohms
• Sensitivity: 22.39 mV/Pa (-33 dB)
• Max SPL: 135 dB (0.5% THD @ 1kHz)
• Signal to Noise Ratio: 76 dB
• Self Noise: 18 dB(A)
• Pass Filter Switch: 100 Hz
• Preattenuation Pad: -10 dB
• Matching Connectors: XLR3F
• Power requirement: 48V phantom
• Weight: 860g / 30.34oz
