Presonus StudioLive 312AI

Marque: Presonus |

Numéro d'article: 232041

Ce produit n'est plus disponible.

Plus populair de Presonus

Presonus StudioLive 312AI

StudioLive 312AI Active Integration loudspeakers deliver studio-monitor accuracy onstage with unprecedented onboard processing and networking features in a compact form factor. PreSonus Active Integration technology enables wireless and wired networking control for setup, tuning, and monitoring functions, using an iPad, a Mac or Windows laptop, or both. The StudioLive 312AI provides the best imaging and intelligibility in its class, making it an ideal choice for installations and mobile applications where high fidelity matters.

Three-way coverage with power to spare
A compact, full-range system with a smooth midrange and rich low end, the StudioLive 312AI delivers 3-way coverage, with a 12-inch low-frequency driver and our proprietary 8-inch, CoActual coaxial speaker for mid- and high-frequency reproduction. These transducers are driven by a hefty 2,000W RMS of triamplified, Class D power, all housed in a compact enclosure. The 312AI is time- and phase-aligned to form a true 4-way system when paired with the StudioLive 18sAI subwoofer, with or without the highpass filter engaged, to provide an optional overlap at 100 Hz for applications that require a little more low-end punch.

The CoActual difference
PreSonus’ proprietary CoActual 8-inch, horn-loaded coaxial speaker offers a consistent acoustic center and is responsible for high- and mid-frequency reproduction. The single point source provided by this coaxial design offers unique advantages, thanks to the driver’s symmetrical response. The net result is exceptional 3D imaging and a natural listening experience that reveals the subtlest details.

Networkable with Wi-Fi, Ethernet, or Dante
The StudioLive 312AI comes equipped for wireless and wired communications over an Ethernet or Wi-Fi local area network for monitoring and control over custom tuning settings. Better yet, add the SL-Dante-SPK option card to create a Dante network and ditch your analog cables in favor of lightweight CAT5e or CAT6 cables.

You’re in control—here, there, and everywhere
The StudioLive 312AI features a robust onboard loudspeaker processor that can be accessed and controlled over a standard LAN network. PreSonus’ SL Room Control app for iPad, Mac, and Windows provides rich, easy-to-use system configuration and individual and group control over any StudioLive AI loudspeaker on the network, including alignment delay, parametric EQ, notch filters, group level, and graphic EQ, as well as performance monitoring. SL Room Control makes customizing your speaker system as simple as connecting an Ethernet cable to a wireless router.

Flexible connections and mounting capabilities
The rear of the StudioLive 312AI reveals a combo XLR/TRS line input and an XLR microphone input with an XMAX Class A mic preamplifier and 12V phantom power, as well as an XLR mix output. In addition to the input mixer, you get speaker level-attenuation control. The lightweight plywood enclosure has two ergonomic side handles, interlocking stacking, and M10 fly points. Dual-position pole mounts allow you to mount the speaker atop a stand or subwoofer at 90 degrees or at a 10-degree downward tilt.

Clear, accurate, powerful—and available now
Whether out on tour or installed in a venue, StudioLive 312AI loudspeakers deliver studio-monitor accuracy at incredibly high SPL, with amazing imaging and intelligibility. With extensive software control and wired and wireless networking, it offers advanced capabilities that go well beyond conventional point-source loudspeakers, yet it’s easy to set up and use. Check out the StudioLive 312AI at your favorite PreSonus dealer.

Presonus StudioLive 312AI

Acoustic Performance
• Configuration: 3-way, triamplified loudspeaker system
• Frequency Response (-10 dB): 50 Hz to 23 kHz
• Frequency Response (-6 dB): 56 Hz to 22 kHz
• Nominal Coverage (-6 dB): 90° x 60°
• Maximum Peak SPL: 131 dB
• Crossover Frequency: LF: (overlapped) 100 Hz - 1 kHz, HF: 1.8 kHz
• Directivity Index (DI): 10 dB, >500 Hz
• Directivity Factor (Q): 10.0, >500 Hz

• LF Transducer: 1x12" Ferrite
• MF Transducer: 8" CoActual™
• HF Transducer: 1.75" compression driver

• Type: Class D
• Total Power Output: 2,000W (total power without protection algorithms and limiter enabled)
• LF Power: 2 x 500W
• MF Power: 500W
• HF Power: 500W
• Rated THD: <0.05% (20 Hz - 20 kHz)
• Dynamic Range: 119 dB (A-weighted)
• Bandwidth: 20 Hz - 20 kHz
• Cooling: Free air convection

Connections and Controls
• Input Channels: 1 mic, 1 line
• Input Connector Types: 1 XLR (F), 1 combo
• Phantom Power: 15 VDC (Ch. 1 only)
• Mic Input Impedance: 1 kO
• Line Input Impedance: 10 kO
• Maximum Input: +22 dBu
• Output Connector: 1 XLR (M) - Mix out
• Controls: Mic Level (Variable: Off to +48 dB), Line Attenuation (Variable: -24 dB to 0 dB), Speaker Attenuation (Variable: -24 dB to 0 dB)
• Indicators: DSP Preset, HPF On/Off, Network Connected, Network Activity, Wi-Fi Setup, Wi-Fi On, Signal, Limit, Clip, Thermal

• Contour Presets: Normal, LBR Source, Floor Monitor
• HPF: 100 Hz, 4th-order Linkwitz-Riley
• Bit Depth: 24-bit
• Sample Rate: 96 kHz

• Material: Eucalyptus Plywood
• Finish: Chemline™ polyurethane
• Grille: Powder-coated steel
• Dimensions (HxDxW): 629.92 mm x 495.3 mm x 416.56 mm
• Unit Weight: 62 lbs (28.12 kg)
• Handles: One on each side
• Monitor Angle: 50°

• Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
• Transducer Protection: 4-ch. multi-threat limiter

• AC Power Input: 100-230V~, 50-60 Hz
• AC Power Consumption (1/8 Power): 250W

Suspension Mounting
• Rigging Points: 12 M10
• Mounting: 35 mm, 2-position

Presonus StudioLive 312AI

Presonus StudioLive 312AI