188,-
180,-
(TTC)
Numéro d'article: 230787
En stock
?
×
Ce produit est de stock dans l'un ou plusieurs de nos magasins et peut vous être envoyé endéans les prochains jours.
Inventaire du magasins
- Saint-Nicolas XXL Pas en stock Essayez ce produit en magasin
- Anvers Pas en stock Essayez ce produit en magasin
- Bruges Pas en stock Essayez ce produit en magasin
- Bruxelles Pas en stock Essayez ce produit en magasin
- Gand Pas en stock Essayez ce produit en magasin
- Herentals Pas en stock Essayez ce produit en magasin
- Louvain Pas en stock Essayez ce produit en magasin
- Liège Pas en stock Essayez ce produit en magasin
- Malines Pas en stock Essayez ce produit en magasin
- Roulers Pas en stock Essayez ce produit en magasin
- France
- Valenciennes Pas en stock Essayez ce produit en magasin
Voir plus
MXR M85 Bass Distortion
The MXR Bass Distortion dishes out big gnarly tones with all the low end your bottom-dwelling heart desires. Working closely with indie pedal phenom, bass dirt guru, and Fuzzrocious Pedals founder Ryan Ratajski, we took a famously nasty sounding distortion circuit and re-tooled it for the modern working bass player.
Back in the day, if you wanted to use a distortion pedal and keep your low end intact, you had to split your clean and dirty signals between two amps. With the MXR Bass Distortion, there’s no such need—this pedal puts control over the clean/dirty mix right at your feet with separate Dry and Wet level controls. The Tone control, which only affects the distortion signal, is a simple high cut filter for dialing back the top end, and the Distortion control sets the distortion signal’s intensity.
Finally, the MXR Bass Distortion’s raunchy sound comes in two flavors, selectable via the LED/SIL switch. The default SIL setting uses silicon clipping diodes for an aggressive, biting sound and a bit of compression, while the LED setting uses LED diodes for a more wide open sound and a nice gain bump.
Back in the day, if you wanted to use a distortion pedal and keep your low end intact, you had to split your clean and dirty signals between two amps. With the MXR Bass Distortion, there’s no such need—this pedal puts control over the clean/dirty mix right at your feet with separate Dry and Wet level controls. The Tone control, which only affects the distortion signal, is a simple high cut filter for dialing back the top end, and the Distortion control sets the distortion signal’s intensity.
Finally, the MXR Bass Distortion’s raunchy sound comes in two flavors, selectable via the LED/SIL switch. The default SIL setting uses silicon clipping diodes for an aggressive, biting sound and a bit of compression, while the LED setting uses LED diodes for a more wide open sound and a nice gain bump.
MXR M85 Bass Distortion
MXR M85 Bass Distortion
MXR M85 Bass Distortion
Accessoires recommandés
Truetone 1 Spot MC5 Multiplug Cable 5
Numéro d'article: 90236
11,99
Truetone 1 Spot MC8 Multiplug Cable 8
Numéro d'article: 106198
16,99
Truetone 1 Spot Adaptor Combo Pack
Numéro d'article: 112808
39,-
Fender Patch Cable 15cm
Numéro d'article: 220952
7,99
EBS Gold Plated Patch Cable 28 Centimeter
Numéro d'article: 252506
11,-
10,99
EBS Patch Cable 10 Centimeter
Numéro d'article: 252699
6,99
