199,-
(Incl. BTW)
In winkelwagen

Artikelnummer: 277832

Bestel voor 17 uur = morgen in huis ?

Winkelvoorraad

Toon meer

sE Electronics SE 7 Matched Pair

The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. With an optimized acoustic design, discrete class-A circuitry, versatile attenuation and low-cut switches and a transformerless output, it delivers clear, natural sound quality at all frequencies for any instrument, without suffering from fizzy highs or a lack of low-frequency punch.

sE Electronics SE 7 Matched Pair



In The Box
• 2x sE7 microphone
• 2x mic clip (with thread adapters)
• 2x wind screens

Specifications
Capsule Type: 1/2" back-electret condenser capsule
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 19 mV/Pa (-34.5 dBV)
Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
Equivalent noise level: 16 dB(A)
Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
Signal to Noise Ratio: 78 dB
Low-cut filter: 80 Hz, 6 dB/Oct, switchable
Attenuation Pad: 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <200 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 3.0 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
Weight: 128 g (4.52 oz.)

sE Electronics SE 7 Matched Pair

sE Electronics SE 7 Matched Pair

 

Gerelateerd van sE Electronics

Interessante alternatieven

Populair van sE Electronics