Artikelnummer: 121796
Dit product is op voorraad in één of meer winkels, maar is op dit moment niet direct beschikbaar voor verzending. Neem contact op met onze klantenservice voor meer informatie.
Winkelvoorraad
- Antwerpen Test exemplaar Vandaag open tot 18 uur
- Brussel Snel leverbaar Vandaag open tot 18 uur
- Gent Snel leverbaar Vandaag open tot 18 uur
- Magazijn Snel leverbaar
- Nederland
- Amsterdam Snel leverbaar Vandaag open tot 18 uur
- Den Bosch Snel leverbaar Vandaag open tot 18 uur
- Eindhoven Snel leverbaar Vandaag open tot 18 uur
- Rotterdam Snel leverbaar Vandaag open tot 18 uur
- Utrecht Snel leverbaar Vandaag open tot 18 uur
Neumann KH120A
Neumann KH120A
Free field frequency response ±6 dB: 46 Hz … 24 kHz
Free field frequency response ±3 dB: 52 Hz … 21 kHz
Free field frequency linearity deviation between 100 Hz and 10 kHz: ± 1.0 dB
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced: ±0.97; ±0.40; ±0.23 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space: 95 dB SPL (>120 Hz)
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 111.1 dB SPL
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz): 105.1 dB SPL
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 104.8 dB SPL
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions: 107 dB(C) SPL
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range): 97 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer): 104 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 88 / 93 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer): 89 / 94 dB(C) SPL
Analog input(s): XLR: analog electronically balanced
Analog input impedance: 10k Ohms in position 94/108 dB SPL at 1 m; 20k Ohms in position 100/114 dB SPL at 1 m
Max. input level: +24 dBu
Common mode rejection ratio (CMRR): >56 dB @ 15kHz
Input gain control (sensitivity): 0 dB ... -15 dB
Output level control (output level in 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
Controller design: Analog; active
Crossover frequency: 2.0 kHz
Crossover slope: 24 dB/oct; 4th order
Equalization: Bass: 0; -2.5; -5; -7.5 dB
Equalization: Low-Mid: 0; -1.5; -3; -4.5 dB
Equalization: Treble: +1; 0; -1; -2 dB
Protection circuitry: Independent thermo limiters for woofer, tweeter. Woofer soft clip and excursion limiters. Amplifier overheat.
Infrasonic filter: frequency; slope: 30 Hz; 6 dB/Oct.
Display: On; Normal Operation: Neumann logo “White”
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Neumann logo “Red”
Display Brightness: White:on/dimmed/off; Red:on/dimmed
Output power woofer amplifier (THD+N with limiter deactivated: 10%): 80 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%): 80 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%): 50 W
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%): 50 W
Mains Power Supply: input voltage; frequency: 100-240V; 50/60 Hz
Power consumption (230 V / 100 V): Idle: 20 W
Power consumption (230 V / 100 V): Full output: 200 W
In-rush current (Peak): 20 A
Cabinet material: Aluminium
Cabinet surface finish; color (front / back): Painted; metallic anthracite (RAL 7021)
Neumann KH120A
Aanbevolen accessoires
