Artikelnummer: 219137
Dit product is tijdelijk niet beschikbaar.
Interessante alternatieven
Populair van Laney
Laney Cub-Head
The CUB-HEAD tube amplifier delivers 15 watts of pure tube tone from a pair of EL84 power tubes. Reverb is also included. Small is beautiful: The CUB series delivers pure, vintage tube tone in small format, lower wattage units providing classic vintage sounds without complicated control layouts or excessive volume levels.
Classic British Amplifier Design
Designed and engineered in Great Britain, the CUB-HEAD delivers 15 watts power and tone via a pair of EL84 power tubes. In addition a less than 1 watt power option can be used, giving the same power tube tone at lower volume levels. Coupled with 3 x ECC83 pre-amp tubes the CUB-HEAD goes from warm cleans to rich crunch giving the classic tones you need.
Connect Up
The CUB-HEAD can be connected up to most passive guitar enclosures via 8ohm and 16ohm speaker connection options. Laney has developed the CUB-CAB fitted with a pair of 12” custom-designed HH drivers specifically for the CUB-HEAD.
Reverb On Board
A rich-sounding reverb adds ambiance to the classic tone from the CUB-HEAD. An FS1 footswitch can also be used to switch reverb remotely.
FX Loop
Your favourite effects pedals can be connected via the FX loop putting the CUB-HEAD at the heart of your rig.
Classic British Amplifier Design
Designed and engineered in Great Britain, the CUB-HEAD delivers 15 watts power and tone via a pair of EL84 power tubes. In addition a less than 1 watt power option can be used, giving the same power tube tone at lower volume levels. Coupled with 3 x ECC83 pre-amp tubes the CUB-HEAD goes from warm cleans to rich crunch giving the classic tones you need.
Connect Up
The CUB-HEAD can be connected up to most passive guitar enclosures via 8ohm and 16ohm speaker connection options. Laney has developed the CUB-CAB fitted with a pair of 12” custom-designed HH drivers specifically for the CUB-HEAD.
Reverb On Board
A rich-sounding reverb adds ambiance to the classic tone from the CUB-HEAD. An FS1 footswitch can also be used to switch reverb remotely.
FX Loop
Your favourite effects pedals can be connected via the FX loop putting the CUB-HEAD at the heart of your rig.
Laney Cub-Head
Channels: 1
Channel Controls: Gain, Treble, Middle, Bass, Volume & Tone
Class: Class A/B
Equalisation: Bass, Middle, Treble
Fx loop(s): Yes
Impedance: N/A
Inputs: 2 : 15w & <1w
Output valves: 2 x el84
Packed dimensions (hxwxd mm): 271 x 475 x 275
Power: 15 watts & < 1 watt
Preamp valves: 3 x ecc83
Reverb: yes
Speaker connections: 8 - 16 ohm connections
Unit dims - for int. case (hxwxd mm): 248 x 435 x 235
Weight: 9 kg
Laney Cub-Head
Laney Cub-Head
