Turbosound Milan M15
The integrated two-channel mixer with mic and line inputs easily balances all your audio sources for the perfect mix every time. Milan's lockable jack/XLR inputs will accept instruments, microphones and mp3 players so you won’t even need a separate mixer for most gigs. The internal DSP with frequency-dependent limiting delivers maximum audio quality and protects the drive units from accidental damage. Sophisticated limiters act quickly and transparently to make sure that Milan operates well within its safe limits and allows precise shaping of the loudspeaker's frequency response depending on how loud it is, thereby optimising the sound quality at all levels.
The Mix Out function allows daisy-chaining of Milan loudspeakers and provides the versatility to easily expand your system. Simply connect from the mix-out to one of the inputs on the next Milan loudspeaker and you have an extra mic or line input to add to the mix Milan provides the versatility to easily expand your system.
The Converging Elliptical Waveguide™ helps to distribute your sound more evenly over a wider listening area so you need fewer loudspeakers to cover your audience effectively. Its shallow profile allows both the drive units to be aligned so that the highs and lows are perfectly in sync with each other. The result is better sound to a wider audience.
Turbosound Milan M15
Net Weight: 22kg (48.4lbs)
Dimensions: 731mm x 471mm x 410mm (28.8" x 18.5" x 16.1")
Components: 1 x 15" (381mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response: 36Hz - 17kHz ±3dB, 23Hz - 22kHz ±10dB
Dispersion: 90°H x 60°V @ -6dB points
Maximum SPL: 125dB continuous, 131dB peak
Construction: Injection-moulded polypropylene enclosure. Self-coloured in black/blue. Three recessed carrying handles. Integral dual angle pole mount socket
Connectors: Input: (2) Jack/XLR female, wired pin 2 hot; Mix out: (1) XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder
Flying Hardware: M10 rigging points on top and bottom
Spares & Accessories: LS-1530 15" (381mm) LF loudspeaker
CD-118 1" (25mm) HF compression driver
RD-116/118 Replacement HF diaphragm
MG-MI5 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 M10 shoulder eyebolt